Greenheck Microprocessor Controller v3.0 (469690) Manual de usuario descargar pdf (Pagina 15)

THIS SCREEN CAN BE LOCKED TO PREVENT TAMPERING WITH THE SETTINGS.

FROM THE FACTORY, ACCESS IS NOT PASSWORD PROTECTED TO ALLOW QUICKER

START-UP.

To set the password, go to the ‘PROGRAM’ menu by pressing the button. Once

there, scroll down until you arrive at the Change Password screen. The ‘Level 1’

password protects the ‘TIME CLOCK’ menu.

CLOCK

hr:min:sec

(Day of week)

mm/dd/yyyy

THE CLOCK SETUP MENU ALLOWS THE USER TO ADJUST THE TIME, DATE, AND

OCCUPIED/UNOCCUPIED MODE SETTINGS.

User can also override the current occupied/unoccupied mode for a designated period

of time.

Time/Date/Day Setup

Press ENTER to reset

the internal clocks

time, date & day

Reset clock

Time-00:00:00

Date: 00/00/00 (m/d/y)

Day-NA

Set the time, date & day here. All three must be

set/reset at the same time. When the cursor is in the

upper left corner, press up or down to return to the

clock menu.

IMPORTANT! User must select one of the three options for the Source in the

Unoccupied mode setup screen in the ‘PROGRAM’ menu. The Source represents the

means by which Occupied and Unoccupied modes are determined.

Option 1: Input ID6 – typically used with a remote time clock (Default)

Option 2: BMS – can be overridden by a separate input to ID6

Option 3: Internal Time Clock – can be overridden by a momentary input to ID6

Occ-Unocc Override

Current Mode:Occ

Override Time:060min

Override:No

CURRENT MODE DISPLAYS WHETHER THE UNIT IS IN OCCUPIED MODE OR

UNOCCUPIED MODE.

(OCC = OCCUPIED, UNOCC = UNOCCUPIED)

This screen will only appear if the Occupied/Unoccupied ID6 function has been set

to ‘ON’ in the PROGRAM menu under Binary Input Enables.

The controller will allow the user to override from Unoccupied to Occupied mode, but

not vice versa. This can be performed by changing this screen to Yes, or it can also

be done through a momentary 24 VDC input to terminal ID6. After the Override Time

expires, the clock returns to the 7-day schedule.

Enable Occ/Unocc

Mon:Yes Tue:Yes Fri:Yes

Wed:Yes Thu:Yes Sat:Yes

Sun:Yes

The following screens only appear if Option 3, the Internal Time Clock function, has been enabled in the Program

Menu.

THIS SCREEN ALLOWS THE USER TO ENABLE/DISABLE UNOCCUPIED MODE FOR

EACH DAY OF THE WEEK.

Selecting ‘No’ means the unit will operate in an Occupied mode only.

Selecting ‘Yes’ means the unit will operate in an Occupied mode and an Unoccupied

mode.

Occupied Unoccup

Mon 06:00 18:00

Tue 06:00 18:00

Wed 06:00 18:00

Enter the desired Occupied/Unoccupied start times for each day (24 hour time scale).

Occupied Unoccup

Thu 06:00 18:00

Fri 06:00 18:00

Enter the desired Occupied/Unoccupied start times for each day (24 hour time scale).

Access the

CLOCK SETUP menu through the Main Menu. Scroll through the menu screens using the keys.

***ACCESS DENIED***

Enter Password:0000

WRONG PASSWORD

TIME CLOCK MENU

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comentarios a estos manuales

Sin comentarios

Greenheck Microprocessor Controller v3.0 (469690) Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Greenheck Microprocessor Controller v3.0 (469690)