Greenheck Microprocessor Controller v3.0 (469690) Manual de usuario descargar pdf (Pagina 21)

Wheel rotation alarm

delay:030s

(input ID3)

THIS SCREEN ALLOWS FOR THE USER TO CHANGE THE TIME DELAY UNTIL THE

CONTROLLER WILL SHOW AN ALARM.

This screen appears whether the wheel rotation alarm was provided or not. If

provided, there will be a wire in ID3 on the controller.

Similar to the Fan/airflow proving switch alarm, the Wheel rotation alarm delay allows

time to elapse prior to the controller showing an alarm. The delay prevents a false

alarm from occurring if the sensor does not pickup the wheel rotation for a second or

two.

Communications Setup

Press ENTER to setup the

communication parameters

The communications setup allows the user to program the type of BMS system

(BACnet, LonWorks, pcoWEB, or MODBUS), and where required, the Identification

# and Baud numbers needed to operate the controller. Screens displaying the

communication options available with this unit are shown.

Communications Setup

Comm Type:None

Communications Setup

Comm Type:BACnet

Communications Setup

Comm Type:LonWorks

Communications Setup

Comm Type:pcoWEB

Communications Setup

Comm Type:PlantVisor

Identification #:001

Communications Setup

Comm Type:Modem

Identification #:001

Communications Setup

Comm Type:MODBUS

Identification #:001

Baud:9600

PROGRAM MENU - continued

1 2 ... 16 17 18 19 20 21 22 23 24

Sin comentarios

Greenheck Microprocessor Controller v3.0 (469690) Manual de usuario Pagina 21